Walking on the road and looking up, the wires and rods can be seen everywhere on the wall, which is what we often say "electronic fence".。But you know, the basic installation of the electronic fence is not only installed on the wall!Take stock today, the latest provisions of the national standard pulse electronic fence basic installation type, a total of 2 kinds!

First, attached installation

Attached to the top or inside of the wall or fence, the distance between the top metal conductor at the front end of the pulse electronic fence and the top of the wall or fence should not be less than 800mm。

Two, floor installation

The installation should be no less than 1 on one or both sides of the front end of the pulse electronic fence.2m protective net or wall to prevent the human body from getting close by mistake。

The detailed steps for the two installation types are summarized in the figure above。In the future, we will also popularize the installation of more difficult electronic fences in special environments。Special environments include high and low undulating drop, large wall pier straddle, drop wall filling line, river edge blind area, more twists and turns, gate fence and so on。

You have also seen what "various" installation forms of electronic fencing？Come and talk to us

Original link:http://mobile.tudouqupiji.net/p/b9306